![]() ![]() EDIABAS supports J2435-1 passthru and a compliant cable, like a Tactrix OpenPort 2.0 cable should work on any model without modification.Īnd it should work with ISTA online at for diagnostics and programming.ĭOH! I just bought a USB cable on eBay, from a seller in Ontario. Hi all Whats the difference between the original Tactrix openport 2.0 from the shop at 169 and the 20 i can find on eBay I need to update the. This is one reason I'm planning to get a J2435-1 compliant cable and try it out (to be used in the times I don't want to break out the big orange OPS head). Lenovo ThinkCentre M710s SFF Intel i7 6th Gen 16GB RAM 256GB SSD Win 10 Desktop. ![]() ![]() It depends on the application and vehicles you are using it in, some older chassis cars have two K-Lines, one on pin 7 and one on pin 8 so most cables have pins 7-8 connected/soldered to accomodate that.Ġ7-09 D-CAN cars don't use pin 8 but still does use pin 7 so the cable continues to work fine, but in 09-10 BMW re-used the pin 8 position for ethernet, so if you have an interface that has pin 7-8 connected (and most of the ones you find on eBay and such do), you'll get errors trying to communicate with the car because of the ethernet connection at pin 8 interfering with the D-CAN connection on pin 7. The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. I thought 06s just needed Kcan and post 06 needs Dcan. Interested but why do you need to solder anything?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |